So a pair of 48" wide drapes can cover 48". Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window if not more - sheers can be 3 times the window width to achieve a look of proper fullness.
In this case 2 panels will give about " to " of width which will look nice and full. Always round up to the next full number. Standard fullness multiply by 2. Measure the length of the window or area you want to cover from top to bottom. Ready-made panels are available in lengths from 63 to inches. You can always have the dry cleaner hem them a bit if needed. Too-short curtains can seem nerdy and off, like high-waters. Here are two surefire approaches.
The fabric should just touch the floor or hover half an inch above. Panels that extend onto the floor by one to three inches are another stylish option. If you have uneven floors or are worried about precision measuring, this style is more forgiving.
In formal rooms, an exaggerated take—six or so inches of fabric pooling on the floor—can look romantic but is also high-maintenance. They'll need to be cleaned more often and will have to be readjusted every time you vacuum or the cat lies on them.
Generally, hanging curtain brackets on the wall above and outside the window molding looks best, since it allows fabric to fall gracefully. Below are two hanging tricks that decorators love for maximizing windows—you can opt for just one technique or use both on the same window. To create the illusion of a taller window, mount the rod four to six inches above the window frame—or halfway between the frame and the ceiling molding.
A track mounted on the ceiling also lengthens windows. Be sure to account for the extra fabric when measuring. Extending the rod three to six inches beyond the frame on each side makes a window feel grander and allows extra light to stream in when the curtains are open the fabric hangs against the wall without blocking the glass.
You can also use this plan to reveal pretty molding. In this case, you may want to leave as much as 12 inches on either side. Remember to adjust your width measurements for this look. The top hem of a curtain, known as the heading, can help define the overall look—casual or formal, feminine or sleek—and also play a part in functionality allowing the panel to slide easily or not. A traditional flat heading that attaches to the rod via rings stitched into its top hem or, sometimes, drapery hooks the rings attach to the hooks.
With either setup, the curtains move easily. A channel along the top holds the rod and creates a casual, gathered effect. A nice choice for curtains that will stay put, because shimmying the fabric back and forth can be difficult.
There are many styles, from narrow pencil pleats to wide, flat box pleats. Pleated curtains generally operate with drapery hooks and rings. Flat loops of fabric hang on the rod. This can look relaxed with sheers or buttoned-up with stiffer fabrics.
A variation on this theme is tie-tops, with bows instead of flat loops—still casual but more feminine and romantic. Decorative curtain rods should relate to the style of the room. Those that are completely hidden from view can be chosen based on function alone. Here are common options. An adjustable pole, often featuring ornamental end caps finials , that attaches to the wall with brackets. Match the metal to other finishes in the room check out West Elm for a wide selection.
You can buy a double curtain rod if you want to layer with sheers. An adjustable U-shaped rod that screws directly into the wall. Panels wrap around the curved sides, making this a good solution for blocking out light. Drapery hooks attach to pulleys inside a track. Can be installed on a wall or the ceiling. Some tracks resemble a rod with finials, concealing all moving parts inside the pole.
Curtains glide effortlessly. The easiest and cheapest but least sturdy option, it adjusts to fit inside a window frame with no hardware. They're also a very affordable option try this minimalist one and ideal for rental apartments.
If you want to be able to pull curtains to the side for more light or a swoopy, formal look, tiebacks are the answer. Mount a curved metal bracket or a peg known as a rosette on the wall about two-thirds of the way down the window this option comes in multiple finishes.
Match the room and the rod for style and finish. There are simple fabric tiebacks and fancy ropes with tassels for a grander effect. If the package lists the flat panel measurement as 54 inches, and the area to cover is inches at double fullness, divide by 54 for the result of four panels. If the package indicates finished width, divide the area to cover by the finished width.
For example, if the package lists the curtain as finished at 25 inches wide, and the area to cover is inches, divided by 25 equals 4. The treatment needs four panels. Each method provides the same fullness. Round the number up to the next even number for a center-split arrangement. This allows the same number of panels on each side. It is helpful to purchase the curtain rod first and install it in the chosen location.
Take the width measurements from the rod for a perfect fit. Linda Erlam started writing educational manuals in She also writes a biweekly newspaper column, "Design Dilemmas," in the "Lakeshore News" and has been published in "Design and Drapery Pro" magazine.
0コメント